參考文獻/References:
[1] CHEN Q,BRAHIMAJ B C,KHANNA R,et al.Posterior atlantoaxial fusion:a comprehensive review of surgical techniques and relevant vascular anomalies[J].J Spine Surg,2020,6(1):164-180.
[2] BUNMAPRASERT T,TRIRATTANAPIKUL V,SUGANDHAVESA N,et al.Reducible nonunited typeⅡodontoid fracture with atlantoaxial instability:outcomes of two different fixation techniques[J].Int J Environ Res Public Health,2021,18(15):7990.
[3] TAN K A,LIN S,CHIN B Z,et al.Anatomic techniques for cervical pedicle screw placement[J].J Spine Surg,2020,6(1):262-273.
[4] LI T,YIN Y H,QIAO G Y,et al.Three-dimensional evaluation and classification of the anatomy variations of vertebral artery at the craniovertebral junction in 120 patients of basilar invagination and atlas occipitalization[J].Oper Neurosurg(Hagerstown),2019,17(6):594-602.
[5] TAN L A,KASLIWAL M K,GERARD C S,et al.Surgical considerations in posterior C1-2 instrumentation in the presence of vertebral artery anomalies:case illustration and review of literature[J].Br J Neurosurg,2019,33(4):422-424.
[6] KLEPINOWSKI T,PALA B,CEMBIK J,et al.Prevalence of high-riding vertebral artery:a meta-analysis of the anatomical variant affecting choice of craniocervical fusion method and its outcome[J].World Neurosurg,2020,143:e474-e481.
[7] 王建華,尹慶水,夏虹,等.樞椎椎動脈孔解剖分型與椎弓根置釘關系的研究[J].中國脊柱脊髓雜志,2006,16(9):677-680.
[8] KLEPINOWSKI T,ZYLKA N,PALA B,et al.Prevalence of high-riding vertebral arteries and narrow C2 pedicles among central-european population:a computed tomography-based study[J].Neurosurg Rev,2021,44(6):3277-3282.
[9] KOTHARI M K,DALVIE S S,GUPTA S,et al.The C2 pedicle width,pars length,and laminar thickness in concurrent ipsilateral ponticulus posticus and high-riding vertebral artery:a radiological computed tomography scan-based study[J].Asian Spine J,2019,13(2):290-295.
[10] 黃學良,朱雙芳,林雨聰,等.三維重建CT血管造影在C1-2水平椎動脈變異診斷中的價值[J].中國脊柱脊髓雜志,2018,28(4):315-319.
[11] BLOCH O,HOLLY LT,PARK J,et al.Effect of frameless stereotaxy on the accuracy of C1-2 transarticular screw placement[J].J Neurosurg,2001,95(1 Suppl):74-79.
[12] LEE S H,PARK D H,KIM S D,et al.Analysis of 3-dimensional course of the intra-axial vertebral artery for C2 pedicle screw trajectory:a computed tomographic study[J].Spine(Phila Pa 1976),2014,39(17):E1010-E1014.
[13] MAGERL F,SEEMANN P S.Stable posterior fusion of the atlas and axis by transarticular screw fixation[M].Vienna:Springer,1987:322–327.
[14] YEOM J S,BUCHOWSKI J M,KIM H J,et al.Risk of vertebral artery injury:comparison between C1-C2 transarti-cular and C2 pedicle screws[J].Spine J,2013,13(7):775-785.
[15] 黃覓,李曉蘭,郭亮,等.基于CTA多平面重建對后路寰樞椎經關節螺釘與樞椎椎弓根螺釘固定術的安全性比較[J].中國CT和MRI雜志,2021,19(2):136-139.
[16] 宋士學,陳語,鄭亮,等.寰樞椎螺釘內固定融合術治療寰樞椎失穩的并發癥分析[J].中醫正骨,2020,32(4):68-71.
[17] LEE J H,JAHNG T A,CHUNG C K.C1-2 transarticular screw fixation in high-riding vertebral artery:suggestion of new trajectory[J].J Spinal Disord Tech,2007,20(7):499-504.
[18] NEO M,MATSUSHITA M,IWASHITA Y,et al.Atlantoaxial transarticular screw fixation for a high-riding vertebral artery[J].Spine(Phila Pa 1976),2003,28(7):666-670.
[19] GOEL A,LAHERI V.Plate and screw fixation for atlanto-axial subluxation[J].Acta Neurochir(Wien),1994,129(1-2):47-53.
[20] ZHANG L,WANG H.Biomechanical effects of lateral inclination C1 and C2 pedicle screws on atlantoaxial fix-ation[J].Orthop Surg,2021,13(7):2027-2033.
[21] AZIMI P,YAZDANIAN T,BENZEL E C,et al.Accuracy and safety of C2 pedicle or pars screw placement:a syste-matic review and meta-analysis[J].J Orthop Surg Res,2020,15(1):272.
[22] PRAGASH V,DOURAISWAMI B,SUBRAMANI S.Axis vertebral dimensions for safe screw placement:a CT normative data analysis[J].J Clin Orthop Trauma,2020,11(5):871-875.
[23] 田野,張嘉男,陳浩,等.3D打印導板輔助椎動脈高跨患者C2椎弓根螺釘置入的臨床研究[J].中國脊柱脊髓雜志,2020,30(4):323-330.
[24] MAHESH B,UPENDRA B,RAGHAVENDRA R.Accep-table errors with evaluation of 577 cervical pedicle screw placements[J].Eur Spine J,2020,29(5):1043-1051.
[25] WRIGHT N M.Posterior C2 fixation using bilateral,crossing C2 laminar screws:case series and technical note[J].J Spinal Disord Tech,2004,17(2):158-162.
[26] MA X Y,YIN Q S,WU Z H,et al.C2 anatomy and dimensions relative to translaminar screw placement in an Asian population[J].Spine(Phila Pa 1976),2010,35(6):704-708.
[27] WANG Y,WANG C,YAN M.Clinical outcomes of atlantoaxial dislocation combined with high-riding vertebral artery using C2 translaminar screws[J].World Neurosurg,2019,122:e1511-e1518.
[28] TSUJI T,CHIBA K,HORIUCHI Y,et al.Atlantoaxial stabilization using C1 and C2 laminar screw fixation[J].Asian Spine J,2017,11(2):314-318.
[29] 董自強,趙改平,畢厚海,等.伴椎動脈高跨的Ⅱ型齒狀突骨折后路寰樞椎固定術的有限元分析[J].中國生物醫學工程學報,2020,39(4):459-465.
[30] HUANG J,WANG X,NIE Q,et al.A novel construct incorporating C2 unilateral pedicle and contralateral translaminar screws for occipitocervical internal fixation:an in vitro biomechanical study[J].World Neurosurg,2021,149:e1166-e1173.
[31] 周樹一,李豪杰,王揚,等.上頸椎后路內固定技術的研究進展[J].中醫正骨,2020,32(11):24-28.
[32] CHEN Q,BRAHIMAJ B C,KHANNA R,et al.Posterior atlantoaxial fusion:a comprehensive review of surgical techniques and relevant vascular anomalies[J].J Spine Surg,2020,6(1):164-180.
[33] SHAO M,DAI Y,ZHU W,et al.Bicortical short C2 pars screw fixation for high-riding vertebral artery provided sufficient biomechanical stability:a finite element study[J].Spine(Phila Pa 1976),2022,47(4):369-375.
[34] SCHLEICHER P,ONAL M B,HEMBERGER F,et al.The C2-pars interarticularis screw as an alternative in atlanto-axial stabilization.A biomechanical comparison of established techniques[J].Turk Neurosurg,2018,28(6):995-1004.
[35] SAI KIRAN N A,SIVARAJU L,VIDYASAGAR K,et al.Safety and accuracy of anatomic and lateral fluoroscopic-guided placement of C2 pars/pedicle screws and C1 lateral mass screws,and freehand placement of C2 laminar screws[J].World Neurosurg,2018,118:e304-e315.
[36] DOU N,LEHRMAN J N,NEWCOMB A,et al.A novel C2 screw trajectory:preliminary anatomic feasibility and biomechanical comparison[J].World Neurosurg,2018,113:e93-e100.
[37] 劉觀燚,徐榮明,馬維虎,等.樞椎棘突螺釘與椎弓根螺釘固定的生物力學拔出力比較[J].中華創傷骨科雜志,2012,14(4):318-320.
[38] NAGATA K,BABA S,CHIKUDA H,et al.Use of C2 spinous process screw for posterior cervical fixation as substitute for laminar screw in a patient with thin laminae[J].BMJ Case Rep,2013,2013:bcr2013009889.
[39] LIU G,LI Q,SHENG F,et al.Outcomes of occipitocervical fixation using a spinous process screw in C2 as a third anchor point for occipitocervical fixation:a case presenta-tion[J].BMC Musculoskelet Disord,2020,21(1):307.
[40] WONG T S,ABDUL RASHID M L,HASAN M S,et al.C1-C2 fusion with absence of C1 posterior arch and presence of C2 high-riding vertebral artery:is it po-ssible?[J].J Orthop Surg(Hong Kong),2019,27(2):2309499019840763.
[41] WANG S,TIAN Y,DIEBO B G,et al.Treatment of atlantoaxial dislocations among patients with cervical osseous or vascular abnormalities utilizing hybrid techniques[J].J Neurosurg Spine,2018,29(2):135-143.
[42] 王圣林,田英輪,許南方,等.頸椎后路“組合式”內固定治療寰樞關節不穩或脫位的臨床療效[J].中國脊柱脊髓雜志,2020,30(4):338-345.
(收稿日期:2022-05-30 本文編輯:李曉樂)
相似文獻/References:
[1]王世龍,蘇紀權,劉巖,等.前路融合內固定術聯合中醫藥療法治療Hangman骨折[J].中醫正骨,2015,27(03):54.
[2]劉建航,陳道云,黃勇,等.手法治療頸源性頭痛臨床療效的Meta分析[J].中醫正骨,2016,28(01):28.
LIU Jianhang,CHEN Daoyun,HUANG Yong,et al.A meta analysis on the clinical curative effect of manipulation on cervical headache[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2016,28(02):28.
[3]梅偉,高曉群.前路復位椎間植骨融合內固定術治療
單節段下頸椎骨折脫位合并關節突交鎖[J].中醫正骨,2016,28(03):42.
[4]孫蘭芬,王龍強,劉潤宏,等.頸椎骨折脫位合并脊髓損傷截癱患者的圍手術期護理[J].中醫正骨,2016,28(03):79.
[5]孫旗,吳齊飛,鄭晨穎,等.頸椎前路手術后咽痛的防治進展[J].中醫正骨,2016,28(05):22.
[6]畢 鍇.頸椎手法常見高危禁忌證的X線診斷[J].中醫正骨,2016,28(08):73.
[7]鄧真,王輝昊,王寬,等.C2～T1三維有限元模型的建立和驗證[J].中醫正骨,2016,28(10):1.
DENG Zhen,WANG Huihao,WANG Kuan,et al.Establishment and verification of three-dimensional finite element model of C2-T1 vertebrae[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2016,28(02):1.
[8]陳海龍,鄭九琴,朱文瀟,等.常規顱骨牽引和全身麻醉下手法復位在下頸椎脫位前路減壓植骨融合內固定術中的應用[J].中醫正骨,2017,29(07):74.
[9]沈知彼,王輝昊,王寬,等.頸椎定位旋轉扳法對不同曲度頸椎內部結構應力的影響[J].中醫正骨,2018,30(03):8.
SHEN Zhibi,WANG Huihao,WANG Kuan,et al.Effect of cervical fixed-position rotary pulling manipulation on internal structure stresses of cervical vertebrae with different curvature[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2018,30(02):8.
[10]鄧真,王輝昊,王寬,等.石氏傷科頸椎定位旋轉扳法的動力學參數在體測量[J].中醫正骨,2018,30(03):17.
DENG Zhen,WANG Huihao,WANG Kuan,et al.In vivo measurement of kinetic parameters of cervical fixed-position rotary pulling manipulation of Shi's department of traumatology[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2018,30(02):17.
[11]楊海云,鄧強,朱寶,等.齒狀突加冠綜合征1例[J].中醫正骨,2022,34(02):77.