參考文獻/References:
[1] Zhang QH,Teo EC,Ng HW,et al.Finite element analysis of moment-rotation relationships for human cervical spine[J].J Biomech,2006,39(1):189-193.
[2] Panagiotopoulou O.Finite element analysis(FEA):applying an engineering method to functional morphology in anthropology and human biology[J].Ann Hum Biol,2009,36(5):609-623.
[3] Bozic KJ,Keyak JH,Skinner HB,et al.Three-dimensional finite element modeling of a cervical vertebra:an investigation of burst fracture mechanism[J].J Spinal Disord 1994,7(2):102-110.
[4] Yoganandan N,Kumaresan SC,Voo L,et al.Finite element modeling of the C4-C6 cervical spine unit[J].Med Eng Phys,1996,18(7):569-574.
[5] Goel VK,Clausen JD.Prediction of load sharing among spinal components of a C5-C6 motion segment using the finite element approach[J].Spine,1998,23(6):684-691.
[6] 陳伯華,孫鵬,Natarajan N,等.頸椎三維有限元模型的建立及意義[J].中國脊柱脊髓雜志,2002,12(2):105-108.
[7] Wang H,Hu B,Bai J.Computational analysis of two atlantoaxial fixation methods[C] //5th IFAC SymModel Cont Bimed Sys.England:Pergamon Pr,2003:175-178.
[8] Brolin K,Halldin P.Development of a finite element model of the upper cervical spine and a parameter study of ligament characteristics[J].Spine,2004,29(4):376-385.
[9] Wheeldon JA,Stemper BD,Yoganandan N,et al.Validation of a finite element model of the young normal lower cervical spine[J].Ann Biomed Eng,2008,36(9):1458-1469.
[10] Hedenstierna S,Halldin P,Siegmund GP.Neck muscle load distribution in lateral frontal and rear-end impacts[J].Spine,2009,34(24):2626-2633.
[11] 任中武,倪斌,張美超,等.上頸椎三維非線形有限元模型的建立及其有效性驗證[J].脊柱外科雜志,2007,5(3):159-162.
[12] 蘇再發,賈連順,張美超,等.利用Mimics和Freeform建立下頸椎三維非線性有限元模型[J].脊柱外科雜志,2009,7(4):221-225.
[13] Kumaresan S,Yoganandan N,Pintar FA,et al.Contribution of disc degeneration to osteophyte formation in the cervical spine:a biomechanical investigation[J].J Orthop Res,2001,19(5):977-984.
[14] Lopez-Espina CG,Amirouche F,Havalad V.Multilevel cervical fusion and its effect on disc degeneration and osteophyte formation[J].Spine,2006,31(9):972-978.
[15] Teo EC,Ng HW.Evaluation of the role of ligaments,facets and disc nucleus in lower cervical spine under compression and sagittal moments using finite element method[J].Med Eng Phys,2001,23(3):155-164.
[16] Schmidt H,Kettler A,Rohlmann A,et al.The risk of disc prolapses with complex loading in different degrees of disc degeneration-a finite element analysis[J].Clin Biomech 2007,22(9):988-998.
[17] Ng HW,Teo EC,Zhang Q.Influence of cervical disc degeneration after posterior surgical techniques in combined flexion-extension——a nonlinear analytical study[J].J Biomech Eng,2005,127(1):186-192.
[18] 張軍,金觀昌,宋建新.人體頸椎C7退變性的有限元分析與實驗研究[J].清華大學學報:自然科學版,2004,44(11):1509-1512.
[19] Hussain M,Natarajan RN,An HS,et al.Motion changes in adjacent segments due to moderate and severe degeneration in C5-C6 disc[J].Spine,2010,35(9):939-947.
[20] 張明才,呂思哲,詹紅生,等.頸椎“椎骨錯縫”三維有限元模型創建方法的研究[J].中國骨傷,2010,23(5):366-369.
[21] 陳金水,倪斌,陳博,等.寰樞椎脫位三維非線性有限元模型的建立和分析[J].中國脊柱脊髓雜志,2010,20(9):749-753.
[22] Zhang QH,Tan SH,Teo EC.Finite element analysis of head-neck kinematics under simulated rear impact at different accelerations[J].Proc Inst Mech Eng H,2008,222(5):781-790.
[23] 張建國,周蕊,薛強.基于揮鞭樣損傷研究的頸部有限元模型的建立及驗證[J]中國生物醫學工程學報,2008,27(3):389-392.
[24] 李雪迎,王春明,殷秀珍,等.頸椎牽引過程的三維有限元分析[J].中華理療雜志,1999,22(6):350-353.
[25] 李勇,張澤勝,王伶俐,等.不同牽引角度治療頸椎病的三維有限元分析研究[J].新中醫,2008,40(9),63-64.
[26] 林斌,殷浩,湯興華,等.牽引對頸椎椎間關節作用的有限元分析[J].中醫正骨,2001,13(6):13-14.
[27] 郎繼孝,陳新民,陳德喜,等.頸椎斜扳手法的三維空間有限元研究[J].中國中醫骨傷科雜志,2005,13(2):40-41.
[28] 鄔黎平,陳曦,樊繼宏,等.頸椎拔伸旋轉手法內在應力的實時監測[J].中國臨床解剖學雜志,2010,28(5):578-581.